----- Original Message ----- 
  From: solarwind 
  To: PICLIST 
  Sent: Wednesday, August 12, 2009 2:20 AM
  Subject: [PIC] My simple dev board is not working


  I finished constructing my very simple PCB and PICKIT 2 is not working
  with it. When I plug it in, PICKIT2 says:

  PICKIT2 VPP voltage level error.
  Check  target & retry operation.


Try taking out the capacitor on the Vpp (MCLR) line.
Your schematic does not show part designators, so I can't be more specific.


  *
  |  __O    Thomas C. Sefranek  tcs@cmcorp.com
  |_-\<,_   Amateur Radio Operator: WA1RHP
  (*)/ (*)  Bicycle mobile on 145.41, 448.625 MHz

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist