> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
Behalf
> Of Philip Pemberton
> Sent: 06 August 2009 15:21
> To: Microcontroller discussion list - Public.
> Subject: [EE] (UK) Sources for smallish high-impedance speakers?
> 
> Hi guys,
>    Does anyone happen to know of a supplier (ideally UK-based) of
small
> (3-inch), round, high-impedance (25 ohms) loudspeakers?
> 
>    The speaker in my Eton E5 shortwave receiver has blown (proven by
> careful application of an oscilloscope to the speaker leads) and
> naturally nobody seems to stock a suitable replacement...
> 
>    For reference, I need:
>      - Round profile, no mounting lugs, 77mm / 3-inch diameter
>      - Ideally 25 ohms, or as close to that as possible. I'm not above
> airwiring resistors over (or in line with) speakers! :)
>      - 1W or so power handling capacity
>      - About an inch deep


Would this be suitable? 16 ohm rather than 25, but about the right
diameter and has mounting holes built in.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=350233264603

Cheers

Mike


=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist