Problem is solved. I moved the Checking part to the calling routine.

> -----Oorspronkelijk bericht-----
> Van: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
> Namens Jan-Erik Soderholm
> Verzonden: woensdag 5 augustus 2009 14:20
> Aan: Microcontroller discussion list - Public.
> Onderwerp: Re: [PIC] PWM wont set output bits, why?
> 
> Where and how are your symbols defined ?
> Where and how are the analog pins setup ?
> 
> 
> Harry H. Arends wrote:
> > I have made some code to produce two pwm's to let two led's fade
in 
> > and fade out.
> > It looks to work but the outputs are never been set. Am i missing 
> > somethin?
> > The PIC used is a 16F685 and i am using MPLAB IDE 8.30 as 
> development 
> > tool.
> > 
> 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist