Hi guys,
   Does anyone happen to know of a supplier (ideally UK-based) of small 
(3-inch), round, high-impedance (25 ohms) loudspeakers?

   The speaker in my Eton E5 shortwave receiver has blown (proven by 
careful application of an oscilloscope to the speaker leads) and 
naturally nobody seems to stock a suitable replacement...

   For reference, I need:
     - Round profile, no mounting lugs, 77mm / 3-inch diameter
     - Ideally 25 ohms, or as close to that as possible. I'm not above 
airwiring resistors over (or in line with) speakers! :)
     - 1W or so power handling capacity
     - About an inch deep

The existing speaker is a paper-coned cheapie thing, 77mm diameter, 
round profile, 1W, 25-ohm impedance. The important thing (to me) is that 
it has similar electrical specs to the original, and that it fits the 
casing. Admittedly the latter is more important to me -- I don't want to 
have to hack up the rather nice looking E5 casing to make a different 
speaker fit.

Thanks,
-- 
Phil.
piclist@philpem.me.uk
http://www.philpem.me.uk/
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist