Are you trying to complement the outputs?

You could use XOR- XOR with one complements a bit, with 0 leaves it alone.

Mike H.

On Fri, Jul 31, 2009 at 10:40 AM, Harry H. Arends<h.arends@home.nl> wrote:
> Hi group,
>
> Using the 16F685 i want to set two bits on PORTC using these lines:
>
> =A0 =A0 =A0 =A0btfsc =A0 OUTPUT, OUT1A =A0 =A0 =A0 ; Is bit set so set it=
 to 1 in
> portC
> =A0 =A0 =A0 =A0bsf =A0 =A0 PORTC, OUT1A
> =A0 =A0 =A0 =A0btfss =A0 OUTPUT, OUT1A =A0 =A0 =A0 ; else if not reset it=
 to 0
> =A0 =A0 =A0 =A0bcf =A0 =A0 PORTC, OUT1A
> =A0 =A0 =A0 =A0btfsc =A0 OUTPUT, OUT1B
> =A0 =A0 =A0 =A0bsf =A0 =A0 PORTC, OUT1B
> =A0 =A0 =A0 =A0btfss =A0 OUTPUT, OUT1B
> =A0 =A0 =A0 =A0bcf =A0 =A0 PORTC, OUT1B
>
> But could this be done easier and if so how?
>
> Regards
>
> Harry
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist