Hi group,

Using the 16F685 i want to set two bits on PORTC using these lines:

        btfsc   OUTPUT, OUT1A       ; Is bit set so set it to 1 in
portC
        bsf     PORTC, OUT1A
        btfss   OUTPUT, OUT1A       ; else if not reset it to 0
        bcf     PORTC, OUT1A
        btfsc   OUTPUT, OUT1B
        bsf     PORTC, OUT1B
        btfss   OUTPUT, OUT1B
        bcf     PORTC, OUT1B

But could this be done easier and if so how?

Regards

Harry

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist