Sure, but I will tell you now that my skull will withstand impacts from the highest voltage you can supply to a printhead. All kidding aside, the throw on an impact printhead is only a 100 mils or less typically. I don't know what you have in mind, but this is a rather short distance. And I will look in my junk box. I may still have one or two left in there. If I do, you pay to ship them to you, and you can have them. Regards, Jim ----- Original Message ----- From: "AGSCalabrese" To: "Microcontroller discussion list - Public." Sent: Wednesday, July 22, 2009 1:45 PM Subject: Re: [buy] Anyone have two or three working dot matrix impact printheads ? > right on, Jim Thanks I will need your address. Oh ...... just > noticed some of the text on the original e-mail was left off. NO > biggie. The missing text just asked for a volunteer to let me apply > impact print heads to their skull at varying drive voltages. I > presume that you are volunteering. > Best > Gus > > >> On Jul 22, 2009, at 11:51 AM, jim wrote: >> >> Okay, proceed. >> >> >> >> ----- Original Message ----- >> From: "AGSCalabrese" >> To: "Microcontroller discussion list - Public." >> Sent: Wednesday, July 22, 2009 12:21 PM >> Subject: [buy] Anyone have two or three working dot matrix impact >> print >> heads ? >> >> >>> I want to experiment with dot matrix impact print heads. >>> >>> Gus Calabrese >>> -- >>> http://www.piclist.com PIC/SX FAQ & list archive >>> View/change your membership options at >>> http://mailman.mit.edu/mailman/listinfo/piclist >>> >> > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist