> >
> > An advice is not to use such simple programmer since you
> > will run into problems in the future. But if you are only to
> > use this as a jumpstart programmer (eg: use this to program
> > a bootloader into the PIC18F4550), then it is probably a
> > good choice.
> =

> Exactly that's what I'm going to do: this simple programmer shall I
> use only as a jumpstart programmer for 'Open Programmer v0.6.x' that
> can one find here:
> http://openprog.altervista.org/OP_eng.html
> =

> Thanks!
> =


Interesting. I have just blown my ICD2 and either need to repair it (I'm 99=
% =

sure it is the input and/or output drivers but I can't easily find replacem=
ents =

for these) or have to buy/build a new one.

I could not find anything about integrating the programmer into the MPLAB I=
DE. =

Can it be integrated into the IDE or does it have to be run as a standalone =

application? I also assume it can't be used as a debuger (yet)?

/Ruben
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
Ruben J=F6nsson
AB Liros Electronic
Box 9124, 200 39 Malm=F6, Sweden
TEL INT +46 40142078
FAX INT +46 40947388
ruben@pp.sbbs.se
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist