Neat, I would put a rod between the top and bottom plywood pieces near the Dremel, nuts top and bottom to clamp the Dremel, so it wouldn't come out. Enlarge the 5th view from top, and notice the etched hole in the copper to get the drill started. The yellow plastic collar comes on some drills is not a problem with or without. I don't know if the color is a code for size? My old drill press has a knob on one side to feed the drill, that works well. The new model has a lever handle, that should work well also. On the DIY, I think it would depend on how steady your hand is. Gentle steady pressure is required for accuracy and drill longevity. Some clumsy or senior folks may have issues. I think it would be easy to add a lever feed with a cam shaped piece of wood. Mark Rages wrote: > On Sat, Jul 18, 2009 at 1:57 AM, solarwind wrote: > >> The most time-consuming part of making PCBs is the drilling part. How >> do you guys drill your PCBs? What's the best and fastest and cheapest >> way? (Olin, don't give me the "you only get to pick two" thing :P) >> >> > > Design your board for SMT. > > Or, http://www.delorie.com/pcb/dremel-stand/ > > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist