Correct but i still have one problem.
In the 16F628 the BOR is set with _BODEN_ON .
But in the 16F685 there are two bits used called BOREN0 and BOREN1 .
But when i use it like this: _BODEN0_ON & _BODEN1_ON then it shows
this error "Symbol not previously defined (_BODEN0_ON) ".
How should i write these two correct to replace the old BOR.

Harry
> -----Oorspronkelijk bericht-----
> Van: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
> Namens Alan B. Pearce
> Verzonden: dinsdag 14 juli 2009 10:19
> Aan: Microcontroller discussion list - Public.
> Onderwerp: Re: [PIC] Fuses list on the web.
> 
> >I need to port code from a 16F628A to a 16F685. The later uses
other 
> >fuses-names than the 16F628A.
> 
> There are not that many fuses in these devices, it cannot be 
> that hard to compare the two datasheets. 
> 
> --
> http://www.piclist.com PIC/SX FAQ & list archive View/change 
> your membership options at 
> http://mailman.mit.edu/mailman/listinfo/piclist
> 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist