> There's always a 0.1-inch header and molex-type connector that can be
> designed so that the top of the connector is flush with the chassis. I
> mean like on the USBProg (the 1x6 ICSP connector, not USB or Rj12):
> <http://www.embedinc.com/products/usbprog2/index.htm> except inset
> further so the top is beneath the chassis.

That would be OK except that it is a techie connector (not exactly 
'student-proof').

-- 

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist