On Wed, Jul 8, 2009 at 1:18 PM, Wouter van Ooijen<wouter@voti.nl> wrote:
> Any fallback suggestions for non-usb connectors that might be useable
> with USB?
>

There's always a 0.1-inch header and molex-type connector that can be
designed so that the top of the connector is flush with the chassis. I
mean like on the USBProg (the 1x6 ICSP connector, not USB or Rj12):
<http://www.embedinc.com/products/usbprog2/index.htm> except inset
further so the top is beneath the chassis.

--
Martin K.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist