I am doing simulation at proteus and i didn't connect pullups to the A and B
lines.I have connected pullup only to the RX pins. Is =FEt necessary at
simulation?

2009/6/24 Dario Greggio <adpm.to@inwind.it>

> Yusuf =D6zkay ha scritto:
> > You are right, the problem is about frame error. But what is the reason
> of
> > it, i couldn't find it yet.
> >
>
>
> Well, it can be anything, from glitches at power suppplly, to glithes in
> the state of 485 A-B lines when switching from TX to RX - btw, do you
> have pull-up and pull-down at A and B?
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist