On Fri, Jun 5, 2009 at 2:17 AM, WH Tan <whsiung.my@gmail.com> wrote:
> Hi folks,
>
> I'm planning to use PIC24FJ256GB110 in my new project. =A0As usual I'll
> read the silicon errata first and I think there are one or two severe
> issues concerning USB module. =A0I thought there are some discussions
> about PIC24FJxxGB devices a while back but so far I haven't seen any
> talk about chip errata. =A0Have you seen any of those anomalousness, and
> how bad it will affect the communication?
>
> By the way, what revision you're using?

I do not use it in product but the Stack 2.4 works fine with my
Explorer 16bit demo board+ USB PICtail+ board + PIC24FJ256GB110
USB PIM combination. There are some minor bugs in the stack
and some missing features.

Are you going to use the host mode or the device mode? I have
not testing too much on the host side. I know the USB composite
based keyboard (those multimedia keyboard) is not supported.

>From the errata, there are several problems with the USB module.
It depends on your application whether they will affect you or not.
As long as you can live with the workaround, that should be ok.

-- =

Xiaofan http://mcuee.blogspot.com

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist