Hello,

a friend of mine is looking for some graphical LCD or TFT for his 
medical device prototype (just 1 piece), but it seems that these 
displays are no longer for amateurs. The specifications are: resolution 
320x240 or higher (up to 640x480), size 3,5' or higher, but the most 
important - some 'normal' connector available in amateur conditions 
(like 2,54mm on all 16x2 LCDs). Last but not least is the communication 
with it - it must have some built in controller and as little wires as 
possible (to be able to be driven by PIC18F4620) - is there some SPI or 
I2C interfaced display, or some with just 8 wires of data bus?

One more thing: if there is not such a display on the market, because 
the demands are too strict, please help me to point me to the right 
direction.

Thanks for any help,
David


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist