Rikard Bosnjakovic wrote:
>> I have a brother laser and have had no success with the TT method. My
>> issue has been finding the right sort of paper to print on because the
>> glossy stuff sometimes melts, and 'warps' in such a way that straight
>> traces are no longer straight.
>
> I had this "melting glossy paper" issue once, but I solved it easily.
> Instead of putting the iron immediately on the paper, I put a small
> towel (or printer paper) between the iron and the glossy paper. The
> towel will absorb some of the heat so you will have to heat longer and
> press harder, but on the plus side is that the glossy paper will not
> be so hot that it melts.

I think the OP means that the glossy stuff melts inside the printer (from 
the heat of the roller). I may be wrong.

Vitaliy 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist