On Sun, Mar 1, 2009 at 10:03 PM, Antonio Benci wrote: > I've just been handed a short term (ie: clients urgent job) to connect a > Lascar DMX973B display to an existing 18F4550 (??) system via SPI, as there > are insufficient pins for 8 bit operation. > > I am not familiar with this display aside from the fact that it uses the > SED1530 controller, is bit mapped and the client needs it up and running is > less than a week, mixed character and graphics. Try taking a look at http://www.geocities.com/g13685/DMX_973_973B.html It seems to have code to run the display: "// Epson SED1530 Constants from datasheet" It is in HiTech but shouldn't be too much trouble to port over to CCS. Probably easier than from scratch. > > Rather than reinventing the wheel, so to speak, are there some library > routines, PICBasicPro or CCS, that permits easy turnkey implementation ?? > Even a controller chip would be great. > > Any suggestions would be most welcome. > > Regards, > > Antonio Benci. Andrew -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist