In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Ugha wrote:

JonnyMac: It's the SX tech board, so I haven't added any additional resistors (Although that's good to know since I intend to build my own project board in the future, thanks!).
I'll also try adjusting the clock to 20mhz and see if that makes a difference.

Pjv:
1: The sleep condition clears to Idle when I hit the reset button on the debugger and then goes to Sleeping again about 95% of the time once I hit run.
2: I have it on the SX tech board so I'm pretty sure there's no pullup resistor on it. I'll try out hitting the reset button later this afternoon when I get a chance to work on it again.
3: I don't have the watchdog timer enabled.

Thanks for the help guys... its very frustrating to not be able to use debug.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=330149#m330166

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2009 (http://www.dotNetBB.com)