Sean,

How about something like 30-386 here:

<http://www.oselectronics.com/ose_p107.htm>

Bill


Sean Breheny wrote:

>Hi all,
>
>I need to make a small quantity of audio cables of custom length. Some
>would be RCA male to RCA male. Others would be right angle 3.5mm (1/8
>inch) stereo on both ends. Lengths would vary from about 5 inches to
>about 1 foot.
>
>I am looking for either:
>
>A) Someone whom I could pay to make these for me,
>
>or
>
>B) A source for the materials I would need to make them myself. I can
>easily find shielded audio cable and RCA plugs. I have not been able
>to find any right-angle 1/8inch stereo plugs. I've checked Mouser,
>Digikey, MPJA, and All Electronics.
>
>Of course, I could take pre-made cables and hack them up to make the
>lengths I want, but I've tried that and the results are not pretty.
>Also, this of course compromises the shielding at the join point to at
>least some degree.
>
>Any ideas?
>
>Thanks,
>
>Sean
>  
>

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist