In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Ugha wrote:

First, I'm working on understanding your code still, I'll most likely be hitting you with questions soon.

I was wondering one thing though...
In the BS2_TO_SX.BS2 file you have the baudmode as:
Baud            CON     T38K4
Which I assume T38K4 is a funky way of saying True 38400 (I never knew about the k thing).
The problem is, according to the SERIN information, the buadmode for non-inverted, no-parity 38400 baud should be: 6
1,000,000 divided by 38400 minus 20 = 6
Am I misunderstanding the helpfile on how to set the baud mode?

As far as studying the helpfiles for SERIN and SEROUT, I've read them several times and I don't see exactly what your pointing out that I should learn.
Can you give a dense newbie a bit more of a push in the right direction?

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=4&m=324554#m326928

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2009 (http://www.dotNetBB.com)