--===============0674766357==
Content-Type: text/plain; charset="gb2312"
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by pch.mit.edu id n113VwKg022050


Don't make 90 degree turn path for signals.=20

Always use 45 degree whereever possible.

> Date: Sat, 31 Jan 2009 21:40:40 -0500
> Subject: [PIC] My First PIC Development Board PCB Design
> From: x.solarwind.x@gmail.com
> To: piclist@mit.edu
>=20
> http://omploader.org/vMTcyaA
>=20
> Here it is. Created with FreePCB. I did not pirate anything -.-
>=20
> In the socket will fit a 28 pin DIP holder for my PIC 16F886 or 18F2620
>=20
> Is it an OK design? Can anyone spot anything wrong? Are the traces too =
thin?
>=20
> This will be for homebrew PCB making by the way (using toner transfer
> and FeCl etching).
>=20
> --=20
> solarwind
> --=20
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist

_________________________________________________________________
MSN=D0=C2=B0=E6=D4=DA=CF=DF=C9=E7=BD=BB=CD=F8=C2=E7=A3=AC=D3=EB=C4=FA=B5=C4=
MSN=BA=C3=D3=D1=B8=FC=C8=AB=C3=E6=BB=A5=B6=AF=A3=A1
http://im.live.cn/msn9/=20
--===============0674766357==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Disposition: inline
Content-Transfer-Encoding: 7bit

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--===============0674766357==--