I started to go through the datasheets, however it seems that the 16F
doesn't have the Timer2 module, so that's where I was running into my
doubts.

On Wed, Jan 21, 2009 at 7:34 PM, Jan-Erik Soderholm <
jan-erik.soderholm@telia.com> wrote:

> Nick McBride wrote:
> > I was wondering if the following code could be adapted for use on a
> > PIC16F688.
>
> Of course it can. :-)
>
> > I've started to go through the code converting things, however,
> > it seems that the Timers are different.
>
> Maybe, you can simply check with the rellevant pages in
> the two datasheets for any differences and make any
> changes needed.
>
>
>
> > I also don't know ASM very well
> > either, so I bog down in converting the gpio port to use PORTC.
> >
> > This code was originally written for a PIC12F683:
>
> [See original post for the code...]
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist