As usual the manufacturers are listed by the Thomas Register:

http://www.thomasnet.com/products/adhesives-conductive-electrically-420000-1.html

The 10000 pixel question is, what is available. Last time I checked one had to
buy a gallon can of the adhesive and it had a shelf life of a few months (before
opening). Industrial adhesives are not necessarily anything like the substances
available over the counter in hobby shops or builder's markets. Refrigeration
and keeping the container in the dark and periodic purging with Nitrogen before
closing the lid, as well as periodic stirring and adding solvent to maintain
viscosity come to mind among the more exotic requirements I would have had to
deal with. Plus it had a huge cost (I assume that it is used in homeopathic
quantities expressed in micro-grams per device manufactured - somewhat similar
to inkjet ink).

In any case the epoxy I used under the microscope was 2-component silver loaded
epoxy, that was also not cheap at all, but it was ok (the labor cost for hours
of manual application under a microscope was the main expense).

Peter


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist