Hello all, I'm working on a design using some new e-paper, and 
apparently the e-paper is connected to the pcb using "thermocompression 
bonding" and this is typical for LCDs, at least the part the connects 
from the glass to whatever pcb they may have.

Never heard of this before.

Does anyone out there have experience with this?  I'd like to DIY if 
possible, although the trace/space on its connector is rather tight. 
Alternatively I could send out to a CM for protos (say qty 10) to be made.

Any advice appreciated.

Thanks-
J
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist