SQTP?


--- On Thu, 1/8/09, Harold Hallikainen <harold@hallikainen.org> wrote:

> From: Harold Hallikainen <harold@hallikainen.org>
> Subject: Re: [PIC] writing a single EEPROM location (serial number) after  being flashed
> To: "Microcontroller discussion list - Public." <piclist@mit.edu>
> Date: Thursday, January 8, 2009, 9:31 AM
> > Ive done some searching on piclist.com and just
> googling, and I am quite
> > sure this subject has come up before.  Is it possible
> using either the
> > ICD2 or PICKIT2, to program specific EEPROM locations,
> essentially to
> > store a serial number for a product after the chip has
> been flashed with
> > the code.
> >
> 
> 
> I've normally put serial numbers or MAC addresses in
> program flash during
> programming using SQTP. I don't think the ICD2 does
> this, but the PM3
> does.
> 
> Harold
> 
> -- 
> FCC Rules Updated Daily at http://www.hallikainen.com -
> Advertising
> opportunities available!
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


      
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist