In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bean wrote:

The output frequency is dependent on the frequency that is clocking the SX, and the ratio of SX clock to output frequency.

For example assume you are using a 4MHz resonator. The resonator could be off by +/- 100ppM or so.

Then you have the ratio. 4_000_000 / 106_000 = 37.7, so this should get rounded to 38. So 4_000_000 / 38 = 105_263 / 2 = 52631 Hz.

Bean.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=315692#m315861

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)