Hi Guys, 
Why are you still wasting your breath? Is obvious he is not listening
hence shall we just stop posting on this?
This as been one of the most annoying set of posts in ages.
Thanks
	Luis



-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
Of Joe Bento
Sent: 16 December 2008 14:34
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] Annoying Electric Field?

solarwind wrote:
>
>
> I'm sure you don't want to hear this either, but you should RTFP.
>
> I've stated that the same 16F690 chip when pulled from the demo board
> and inserted onto the breadboard works flawlessly. No fancy pullup
> resistors or decoupling capacitors.
>
>
>   


I wouldn't call those 'fancy' components.  Less than 0.05 cents worth of

parts that should be part of EVERY circuit design whether it be on a PCB

or breadboard.  If you have multiple chips, there should be a 0.1uf cap 
at EVERY VCC/VSS line at EVERY chip, as close to the chip as possible.  
This is common engineering practice.  Don't 'Muntz' your circuits.  
(Look that word up.  Interesting story behind the name.)

Joe


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist