On Sun, Dec 7, 2008 at 8:45 PM, Bob Ammerman <rammerman@verizon.net> wrote:
> Added step 1A to the following:
>
>>> So, you want to do the following:
>>>
>>> 1: Make sure you properly initialize your inputs as digital as opposed to
>>> analog (often controlled by a port called ANSEL, but this varies amoung
>>> several different PICs).
>
> 1A: You may also have to disable the built-in comparator(s) on some PICs.
>
>>> 2: Make sure your inputs are set up as inputs rather than outputs (this
>>> is
>>> the default condition, check out TRIS registers for this).
>>>
>>> 3: Make sure that interrupts are globally disabled (often a flag bit
>>> called
>>> GIE). This is the default condition.
>>>
>>> 4: Make sure the interrupt-on-change interrupt is enabled (another flag
>>> bit).
>>>
>>> Now a SLEEP should be terminated when the input bit changes, but no
>>> interrupt handler is needed.
>
> [notice the mixed "TOP POSTING" and "MIDDLE POSTING", hope nobody flames me
> on this :-)
>
>
> -- Bob Ammerman

Ok, I tried it with step 1A added. Still no luck. I honestly tried and
read the datasheet. Here's my code. I don't know what I'm doing wrong.

http://pastebin.com/f286b7121


-- 
..::[ solarwind ]::..
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist