Yes, its a brand new pot with a conductive plastic track 
Warranty, and it's supposed to last 100 000 000 cycles.
I have three of those.

5 kohm, but I had to put a 12kohm resistor in series to 
do a voltage divide to get it down from 0-24v to 0-10v.
Unfortunately it came more to 0-6v so perhaps it could 
help to change that resistor to something lesser to get
more voltage over the lin-pot.



-----Ursprungligt meddelande-----
> Tho it still doesnt work as it should, the voltage across it jumps up/dn
> even when it is still. Wonder if it is a crap quality linear pot. 

ISTR you mentioned it's a new pot with a conductive plastic track. You
might expect poor performance like that from an old carbon pot. I wonder
if there's some contamination. Perhaps clean it out with meths / compressed
air. It seems presently it's unuseable so you've more to gain than lose

Is this a high value resistance that might be picking up electrical noise ?

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist