Harold Hallikainen wrote:
>> I'm in the process of defining what has to occur during a bootload
>> operation, at a high level.
>>
>> The actual code delivery will be from another PIC that talks to the target
>> over a serial connection.  So the code essentially passes from a host on
>> one serial port, and then to the target.
>>
>> When its 'done'...I'm guessing that the final command can be...goto 0x000
>> for a soft reset.  Reasonable?
>>
> 
> That should work. If you have the WDT enabled, you could also go into an
> infinite loop and let it time out. That would put all SFRs back at their
> power up values (I think), where a goto 0 would not.

The RESET instruction on PIC18 will get all SFRs back to the POR
state. I guess the same is true for the new RESET instruction
on the new PIC161xxx...

Jan-Erik.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist