Exactly. We am looking closely at them for commercial work.

Overall nice job, BTW, Olin.

--Bob

On Thu, Oct 30, 2008 at 5:37 PM, Olin Lathrop <olin_piclist@embedinc.com> wrote:
> alan smith wrote:
>> Wondering from the group prespective, is $75 too expensive for this?
>
> $75 doesn't even buy two hours of technician time.  Then there's getting all
> the parts, which takes time whether you do it for this project or did it a
> while ago just to have them in stock.  Even a good technician would be hard
> pressed to wire up something like that, or even just the part you need for
> your particular project in 2 hours.  And the result of that wouldn't be a
> low-noise four layer board with a complete ground plane and a nice place to
> put your target circuit with ground a various power all just there, and
> you'd probably be more worried there was a mistake in the infrastructure if
> things didn't work right.  Don't even think about a working USB interface
> for many times that cost.
>
>
> ********************************************************************
> Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
> (978) 742-9014.  Gold level PIC consultants since 2000.
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist