Andre,

Have you tried turning off power after 4ms? or 3ms? to see if reliable
writes can be made in lesser time?
If you can, that would shave some time off your total.



	
Jim 

-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
Of Andre Abelian
Sent: Monday, September 29, 2008 4:52 PM
To: Microcontroller discussion list - Public.
Subject: [PIC]: EEPROM 64 bytes page mode write result

Hi to all,


I just wanted to mention that I tried the eeprom write in page mode I
put together my own routine. I turned off the eeprom power after 5ms
write then I checked the content of eeprom with programmer and the
result is Yes the eeprom is writing 64 bytes in 5 ms that's cool.

Now I have more questions:

1. if I want to write 32000 byte using page mode is this means I have to
repeat same function 32000/64=500 times? X 5ms = 2.5 seconds

2. In datasheet I couldn't find command how to do full erase or fill?

I use 24LC256 from microchip


Any idea or suggestion will appreciate.

Thanks 

Andre  
        

IMPORTANT NOTICE: This notice constitutes Proprietary Rights
identification of this email including all attachments, which is
property that is intended only for the use of the individual or entity
to which it is addressed.  It also may contain proprietary data or
information that is privileged, confidential, or otherwise protected
from disclosure under applicable law.  The recipient of this data agrees
to abide by the United States Export Control of Technical Data and
Equipment under the International Traffic in Arms Regulations (ITAR) and
Export Administration Regulations (EAR).  The recipient agrees to abide
by these laws and their regulations not only for export and re-export,
but for disclosure to non-U.S. citizens.   This email does not grant or
assign rights of ownership in the proprietary subject matter herein, nor
shall it be construed as a joint venture, partnership, teaming
agreement, or other formal business relationship.  If the reader of this
e-mail transmission!
 
  is not the intended recipient or the employee or agent responsible for
delivering the transmission to the intended recipient, you are hereby
notified that any dissemination, distribution, copying or use of this
e-mail or its contents is strictly prohibited.  Please notify the sender
you received it in error by responding to the e-mail and then
permanently delete it and all copies of the e-mail immediately,
including any copies of it in your deleted email folder.


--
http://www.piclist.com PIC/SX FAQ & list archive View/change your
membership options at http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist