> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
Behalf
> Of Andre Abelian
> Sent: 24 September 2008 17:07
> To: Microcontroller discussion list - Public.
> Subject: RE: [pic:] I2C EEPROM write speed ?
> 
> What do you think I need to learn more about EEPROM?
> CCS Compiler I am using doesn't support page mode byte mode only.
> 
> thanks
> 
> Andre

This is an excellent reason not to blindly use the libraries that come
with development tools.  Does the library not provide low level I2C
functionality, e.g. start/stop/read byte/write byte etc?  If you learn
how the EEPROM works you can use this functionality to invoke page
writes.

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist