In SX Microcontrollers, SX/B Compiler and SX-Key Tool, ladian wrote:

Thank you JonnyMac.

It doesn't seem to be working for me. I've studied the code, RA.0=RX, and RA.1=TX.  then launced the PLX-DAQ sheet. I didn't noticed anything. added a few cell data, and nothing. Looks like the baud is set to 56k, so i set it to that in PLX-DAQ as well, and nothing.

any ideas ?

 

little side note.

I'm anitabills partner in crime, we are working together on this.

when i first started going through your program, i was like huh ?!?!

all we needed was a program to turn a led on or off depending of the value of one cell.

then I think I started to get your message. 

While he may be spoon feeding, he still want us to figure out on our own what we need to do with some editing.

Which in the long run will help us out.

As Anitabill said, we are new, but we should be able to figure out most of what you wrote.

And i think from searching the forum, we found a program which lead us down the wrong path.

 

thanks.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=295016#m295222

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)