In SX Microcontrollers, SX/B Compiler and SX-Key Tool, robotworkshop wrote:

Hello Jarret,

I think I can help clarify this.  The "Rx" in the schematic is a resistor (usually 10K ohm) and not the resonator itself.  It is very common to see a 10K resistor across the two OSC pins when using a resonator with the SX chips.  On some you may also see a small (5pf cap) from one of the OSC leads to ground.

You still need to install the resonator itself.

Hope this helps.

Robert

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=2&m=175498#m294117

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)