In SX Microcontrollers, SX/B Compiler and SX-Key Tool, DynamoBen wrote:

[quote="c56"]
...at low values the lights do not turn on until up around a dimming value of 50. I believe this is due to the the physics of the lamps, since many commercial dimmers provide a "standby" voltage to keep incandescent filaments warm. [/quote]I loaded your code and took a look at an output with my o-scope. The problem isn't related to the lamps, the problem is your code isn't firing the outputs until 50%. In addition the outputs "snap" from 50% to 100% when you move from DMX intensity 99% to 100%. Basically you are only getting the lower 1/2 of the dimming range.
 

There is something odd going on in the code. I will try to pour though it and see if I spot anything.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=263685#m285849

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)