In SX Microcontrollers, SX/B Compiler and SX-Key Tool, tdg8934 wrote: I'm thinking about a similar project using a master SX28 to transmit serial data to 2 or more SX28 slaves that are connected to 7 segment displays or LCDs or something. I want to be able to connect a keypad to the master SX28 and select which SX28 slave (7 segment or LCD) to send data to it. So if I select slave 1 via the keypad, I want to also send a number to the display like 1234 or something. I have seen and used the example SX code of a keypad using an SX28 as a keypad driver. Is it reasonable to expect that the sx28 master to the slaves could still be used as a keypad driver and master? If so, I have seen the example code for the SX Slave, is there any for an SX Master? ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=2&m=280581#m285408 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)