John Ferrell wrote:
> I fought this problem pretty hard dealing with a 500 ohm pot (voltage 
> divider) at the end of a 100 foot cable. The A/D looked good on the scope 
> without the cable and the cable looked good without the A/D. 
This sounds like it could be a transmission line effect to me, my guess 
is that the spikes from the ADC were getting reflected off the far end 
of the cable becoming effectively noise on future readins.


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist