We have had minimal problems with Flextronics in Dongguan. But they
are not the cheapest & tend toward the high volume production end of
things. Their display cabinet shows  product they have manufactured
for Sanyo etc. for example.

RP

2008/8/11 Apptech <apptech@paradise.net.nz>:
> I'm looking for a competent Chinese mainland based SMD
> assembler.
> There are probably about 3 zillion of these but a personal
> recommendation based on good success may be useful.
> Preference is a manufacturer who will accept moderate
> production volume capability but have the ability to rise to
> reasonably large volumes over time. Nice to have are
> commitment to quality, good communications, commercially
> realistic turnaround times.
>
> Two layer pth, around 50 single sided components. Mainly
> discretes. Nothing challenging and not overly dense. Two
> small SO ICs.
> Three through hole wiring connectors - could be added
> afterwards.
>
> Production outside mainland China (ROC or elsewhere) is
> conceivable but overall cost after all aspects are
> considered would need to be competitive.
>
> Any recommendations?
>
>
>        R
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist