On Sun, Jun 29, 2008 at 6:18 PM, Tom=E1s =D3 h=C9ilidhe <toe@lavabit.com> w=
rote:
>
>
> Mark Rages wrote:
>> I suppose, if you have extra pins.  You should use a separate resistor
>> from each pin, to help the current sharing.
>>
> So instead of having:
>
>    PIC pin    --->    80 ohm resistor    --->    LED    --->    Ground
>
> I'd have:
>
>    PIC pin    --->    160 ohm resistor   \
>                                                             \
>                                                               LED --->   =
 Ground
>                                                             /
>    PIC pin    --->    160 ohm resistor   /
>
> That right?
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

Yes, that's the idea.

Regards,
Mark
markrages@gmail
-- =

Mark Rages, Engineer
Midwest Telecine LLC
markrages@midwesttelecine.com

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist