At 06:05 PM 6/28/2008, Dave Lag wrote:
>Marc Nicholas wrote:
>>I've been searching around for nice aluminum or plastic "metal" finish
>>control knobs for a project. ~1" diameter and a 6 or 6.25mm shaft would be
>>perfect. It seems many manufacturers don't make knobs for continuous
>>controllers? (i.e. without notches, lines, indents etc).
>>Anyone got a favourite knob supplier with a decent website?
>>TIA,
>>-marc
>
>http://apexjr.com/Sinks.htm
>..
>IIRC Spehro was selling some knobs a while back, Spehro?


http://server2.hostingplex.com/~zstoretr/trexon_knob_32mm_dwg.png
http://server2.hostingplex.com/~zstoretr/knob_32mm.jpg

Anodized machined black aluminum shell, lightweight, push-on for 6.0mm
(not 1/4" = 6.35mm) D-shaft. No marker line. Top quality.

2.00 USD ea. any quantity.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist