If you want quick and easy for a one-off I've heard good things about this:
http://www.sparkfun.com/commerce/product_info.php?products_id=3D8248

There's also a 2xAA version.

-n.



On Wed, Jun 25, 2008 at 9:43 PM, Tom=E1s =D3 h=C9ilidhe <toe@lavabit.com> w=
rote:
>
> I have bi-colour LED's on my board that have about 2.2 volts across them
> when there's 25 mA flowing through them.
>
> I'm thinking of using a single 1.5 volt AA battery to power my board.
>
> I've got two questions:
>
> 1) Can I go straight from the 1.5 V battery into the LED's without a
> current-limiting resistor?
> 2) What kind of regulator should I use to provide my uC with 5 volts?
>
> Very little current will be drawn from my uC's output pins because all
> the output pins go straight into driver chips, so this can be taken into
> account when choosing a regulator. Something small and cheap to step 1.5
> volts up to 5 volts.
>
> My uC is the 887.
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist