This is a multi-part message in MIME format.
--------------000706000800060200080703
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable

 From the TI WWW Page:

The OPA454 is a low-cost operational amplifier with high voltage (100V) a=
nd=20
relatively high current drive (25mA). It is unity-gain stable and has a=20
gain-bandwidth product of 2.5MHz.

The OPA454 is internally protected against over-temperature conditions an=
d=20
current overloads. It is fully specified to perform over a wide power-sup=
ply=20
range of =B15V to =B150V or on a single supply of 10V to 100V. The status=
 flag is an=20
open-drain output that allows it to be easily referenced to standard low-=
voltage=20
logic circuitry. This high-voltage op amp provides excellent accuracy, wi=
de=20
output swing, and is free from phase inversion problems that are often fo=
und in=20
similar amplifiers.

Michael Rigby-Jones wrote:
>=20
>> -----Original Message-----
>> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
> Behalf
>> Of gacrowell@micron.com
>> Sent: 19 June 2008 23:06
>> To: piclist@mit.edu
>> Subject: [EE]Looking for an op amp
>>
>> I'm looking for an opamp with +/- 30V supply. The fastest amp that I
>> have found has been this one:
>>
>> http://focus.ti.com/docs/prod/folders/print/opa552.html
>>
>> It has slew rate of 24V/uS and has a wide supply range of +-30V. Does
>> anyone know of anything similar that would have a faster slew rate?
>>
>> Gary Crowell
>> Micron Technology
>=20
> Depends on how much you want to pay!
>=20
> <http://www.mskennedy.com/client_images/catalog19680/pages/files/130rc.=
p
> df>
>=20
> 300v/us, up to 15-400v supply (!!)
>=20
> No doubt the DC specs are appalling though.
>=20
> Regards
>=20
> Mike
>=20
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> This e-mail is intended for the person it is addressed to only. The
> information contained in it may be confidential and/or protected by
> law. If you are not the intended recipient of this message, you must
> not make any use of this information, or copy or show it to any
> person. Please contact us immediately to tell us that you have
> received this e-mail, and return the original to us. Any use,
> forwarding, printing or copying of this message is strictly prohibited.
> No part of this message can be considered a request for goods or
> services.
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>=20

--------------000706000800060200080703
Content-Type: text/x-vcard; charset=utf-8;
 name="Nino_Benci.vcf"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="Nino_Benci.vcf"

begin:vcard
fn:Antonio L. Benci
n:Benci;Antonio L.
org:Monash University;School of Physics
adr:;;BLD27 / RM118-119;Monash University;VIC;3800;Australia
email;internet:electronic.services@sci.monash.edu.au
title:Professional Officer / E&IS Manager
tel;work:+613 9905 3649
tel;fax:+613 9905 3637
x-mozilla-html:FALSE
url:http://physics.monash.edu.au
version:2.1
end:vcard


--------------000706000800060200080703
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--------------000706000800060200080703--