William,

If the response is like "because we say" then they should be able to
refer to the reference in the spec that requires it.

In the tests we get done, every test is cross referenced to the
relevant spec paragraph(s) so we can double check the requirement &
limits etc.  If they can't or won't do this then I'd look at moving
somewhere else.

Richard P

2008/6/19 Martin K <martin@nnytech.net>:
> William Bross wrote:
>> Thanks for the response Mike.
>> I have.  And the exact response I've received so far--because we said
>> so.  And yes, it definitely will kill low voltage devices.  And it's not
>> just supposed to be a sample, it's 100% of production.  This is the same
>> project I asked the testing engineer how to calculate DC power -- and he
>> didn't have a clue!  That's why I'm getting very suspicious of this
>> organization and I've had more than a few hackles raised over this project.
>>
>> Bill
>>
>
>
> Talk to his manager or go elsewhere. Don't waste your time.
>
> -
> Martin
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist