I'm sorry Andre,
I thougth it was related to a mere VGA DB15 connector.


On Monday, June 16, 2008 11:45 AM [GMT-3=CET],
Andre Abelian  wrote:

> Dennis,
> 
> It's good to know that. This info is for DVI cable right?
> 
> Thanks
> 
> Andre
> 
> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
> Of Dennis Crawley
> Sent: Saturday, June 14, 2008 6:39 AM
> To: Microcontroller discussion list - Public.
> Subject: Re: [OT] My pc is not booting ? any help
> 
> On Friday, June 13, 2008 12:03 PM [GMT-3=CET],
> Andre Abelian  wrote:
> 
>> Hi to all,
>> 
>> I have asus P5WD2 motherboard
>> http://www.neoseeker.com/Articles/Hardware/Reviews/p5wd2/
>> 
>> that hardware looks like running but there is no video or it doesn't
>> boot.
>> I changed
>> 1. power supply
>> 2. video card
>> 3. RAM
>> 4. cleaned well
>> 5. mother board battery
>> 6. checked connections
>> 7. removed CPU and put it back
>> 8. I do not see any burned area
>> 
>> I left it off for 2 weeks thinking of end of life and 2 days ago it
>> started
>> Working then same problem again after working about 1 day.
>> 
>> Any idea?
>> 
>> Thank you
>> 
>> Andre
> 
> Andre,
> try to isolate the ID control. I have discovered that when the pins
> 11,12
> and 15 are isolated, the monitor runs!.
> 
> Dennis
> 
> 
> 
> 
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist