Quoting "Stephen D. Barnes" <stephendbarnes@cavtel.net>:
> I have an ICD3 (R23) that will not release the target chip from reset.
> While in reset, it holds the MCLR at 0V. When releasing from reset, it
> only allows MCLR to rise to approx. 1.8 to 2.1V. I am using the
> recommended diode/resistor combo from VDD to MCLR. Does anyone have
> suggestions as to what may have failed in the ICD2 to cause this?

Does this happen when the ICD2 is connected to the target, or even  
when it's not
connected?

IIRC, Microchip will replace the hockey puck free of charge.

Vitaliy

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist