Hi Jim,

A few questions:

1) What voltage are you running these at?

2) Is this happening on all the parts you are trying to reprogram?

3) Have you tried a "bulk erase"?

Sean


On Fri, May 9, 2008 at 3:11 PM, PAUL James <James.Paul@colibrys.com> wrote:
>
> Tim,
>
> No.  Code protect is not on now, and it wasn't on before.
> Thanks for the response though.
>
>
>                                        Regards,
>
>                                          Jim
>
> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
> Of Timothy Weber
> Sent: Friday, May 09, 2008 1:51 PM
> To: Microcontroller discussion list - Public.
> Subject: Re: [PIC]: Memory Map Question
>
> Jan-Erik Soderholm wrote:
>> Yup, CONFIG bits are between h'2000' and h'2007', which probably are
>> adressed as h'4000' to h'4015' in the HEX file...
>
> Is it possible those are the first bytes to be compared, and you had
> code protection set on?
> --
> Timothy J. Weber
> http://timothyweber.org
> --
> http://www.piclist.com PIC/SX FAQ & list archive View/change your
> membership options at http://mailman.mit.edu/mailman/listinfo/piclist
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist