> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
Behalf
> Of PAUL James
> Sent: 09 May 2008 16:34
> To: Microcontroller discussion list - Public.
> Subject: [PIC]: Memory Map Question
> 
> All,
> 
> I have a question for the PIC community that has me stumped at the
> moment.  Here is the scenario.
> I am using an ispPro programmer from Basic Micro.  It works well, and
we
> have used it for a long time.
> We have a 16F76 in one of our systems.  I erased the program memory,
and
> reprogrammed it with different code.
> At the end of the programming cycle, I get an error that the
programmer
> can't verify location $4000.
> The top of the address space is $3FFF or at least I thought it was.  I
> looked at the datasheet, but didn't find anything
> about address $4000.  I thought it might be a system location that is
> only availabe to the device programmer at program time.
> 
> Does anybody know what is significant about this location?  When I do
a
> read, I see location $4000 is $80.  When I erase it, it still says
$80.
> It should be $FF if it is truly erased I think.  If I reprogram it
with
> the old firmware, I still get the error.  It's like the bit is stuck
> high.  It can't be
> programmed low.
> 
> Anyway, if anyone has any insight, let me know.   I would appreciate
it.

Is it possible your hex file contains addresses past the end of the
PIC's memory, and the programmer is blindly attempting to program them?

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist