> Write down the device names, make sure you get them right, then do 
> something like:
> dd if=/dev/hda1 of=/dev/hdb1 bs=1M
>
>   

While dd can sometimes be used for imaging it sounds like there are disk 
problems with the "good" drive (this is unfortunately a fairly common 
problem when it comes to raid rebuild time). So such a basic tool is 
probablly not a good choice.


You could try partimage from a linux livecd which will at least copy 
only the used sections of the drive but i'm not sure if it has an option 
to continue in the face of errors or not.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist