On 4/14/08, Gordon Williams <g_will@cyberus.ca> wrote:
>
> ----- Original Message -----
> From: "Vasile Surducan" <piclist9@gmail.com>
> To: "Microcontroller discussion list - Public." <piclist@mit.edu>
> Sent: Monday, April 14, 2008 5:43 AM
> Subject: Re: [EE] Egale Layout - How to change pad type?
>
>
> :
> : On Eagle you can't modify a footprint if is already used by a
> : component, so you need to create again a completely new component for
> : a simple modification in PCB.
> :
>
> You don't need to create a new component (what Eagle calls a device).  You
> add a package (board foot print) to the current device.  Update the library
> as noted earlier, then change to package type in the schematic editor using
> "change > package".
>
> Two documents that are well written are the tutorial and the manual.  They
> will give you the info that you need.

thx, but I already read those in 2004.

>
> Regards,
>
> Gordon Williams
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist